Thursday, November 29, 2012

Rocker template

I promised I would post how I made the rockers on the kids rocking chair.  Basically it is an arch that I cut out with a router and circle cutting jig.  I bored holes for clamps.  There are three important things to remember with this jig:
1. Put tape, either packing or masking, on the top of the fixture.  The thin strips are then put on top of the tape.  This allows you to remove the part once the glue dries. 
2. Have one of the thin strips protude a little more than the others.  This allows for a clean edge to cut off the excess glue and clean up the edges.  Make sure you allow to cut about 1/4-3/8" off the width for this.  I also use the top piece to be my larger/off set piece because glue does not drip over the edge.
3. Use plenty of glue.  Once the thin pieces are laminated they can not be re-laminated if they separate.



I used 3/6" thick strips and and laminated five of them together.  They bent just fine.  there was about a 1/4" spring back so this needs to be accounted for in the fixture.

Sunday, November 25, 2012

The Gerbil

This will be the first puzzle that I created.  I stole the basic design from a picture on the web and then put the letters in.  If you would like to take the design, please do.  Copy the picture and print it out.  Trace the lines with a black pen and enlarge or reduce to the size you want.  This one is about 7" long. 

Sunday, November 4, 2012

A little out of my league

This is not a post about wood working but about my life.  Yesterday I did a 10k trail run in the Chino Hills state park.  It was a little chaotic start because there was at the same time a 50k, marathon, and a half marathon all starting at the same time.  As I was warming up I was looking at the cars in the parking lot.  The bumper stickers and license plate frames told me this was not the same group who do mud runs, color runs, or zombie runs.  These people have ultra marathon finisher (78.6miles), iron man finisher, 100 mile Tahoe finisher. This was a little more extreme then I will take my running.  I have a goal to run a marathon next year, now I am not sure I am going to make it after this 10k.
The run was not my best performance.  I do realize that I cannot compare to my high school and college days but 1:01was not what I was hoping.  This is roughly 10 minute miles.  As for the course, not easy.  There was about 800 feet of elevation gain over the first 2.5 miles and a sharp decent in about 3/4 of mile.  So the climb killed my quads and the decent killed my knees.  When I came off of the decent there was 3 miles of relatively flat and I was in fifth place at the time.  Over the next three miles I fell to ninth, not because I wanted to but because I physically could not run any faster. I tried to pace myself off the people that passed me but could not keep the pace.
I realize I have to do some work on the hills.  I do not have any in my neighborhood so I have to look elsewhere.  My tactic is three miles 3 times a week and stepped mileage on Saturday (plus one mile each week)  Is there any way to improve my speed on road road running or am I going to have to go back to intervals? Can I train for a marathon like this?

Saturday, October 27, 2012

Taking Care of a Baby Doll

One of the Christmas requests I received this year was to make a cradle, high chair and rocking chair.  Here are the three.  Here is the cradle.  I have made a couple of these before to use up some lumber I had laying around.  It is a birch plywood with a walnut stand.  You can read about the original project here.
The high chair came from this blog.  Interesting blog.  Since I built one of her projects I am supose to release her from liability.  What I find interesting is that she is from Alaska and she posts all her plans for anyone to use.  There are some good plans that she has done.  This one is pretty basic.  I changed the joinery a little bit.  I used dowels and biscuits and she used screws and caps.
The chair is made from maple and walnut.  I doweled all the horizontal pieces together and biscuit joined the sides together.  I wanted to dowel the sides together but I used the fixture incorrectly and screwed up a side.  Learned a lesson on that one.  Doweling is not that easy to do.  The neat thing about the chair is the picture below.  This is the seat.  Not very often I get excited about a board that I see and have to have it.  Let me rephrase that.  A board that I see and can afford.  I saw this in the lumber yard and the grain was pronounced and looked great.  I try to make the entire project out of the same or similar board so it matches.  Fortunatly for me all the other parts were cut and I just needed  the seat.  I don't know what I am going to do with the rest of this walnut.
The rocking chair was patterned after the one my grandfather or great-grandfather made for for my mother. I did make some changes but the original construction is all the same  This is another maple and walnut piece.  The center is glued up and all the pieces were cut from that glue up so the grain seams to continue.  I did cut the bottom rail last so the mineral streak does not continue on to that piece.

 Just for your enjoyment, my son in the rocking chair. He is 18 months to give you an idea of the size.
Here is the cool thing about this board.  I lucked into this one.  I was not really looking for this character but after it was finished the tiger stripping came out, pictured below.  Yes I also tried to make this look like it was book end pieces of material between the walnut. 
The only change I did to my grandfathers construction was the rockers.  He put a steeper radius on the the rockers which allows it to rock more.  His rockers were also cut out on a band saw.  I chose to laminate mine with thin strips of wood. This allowed me to make a pattern and it is also stronger.  If I remember I will take a picture of the fixture and my mother's child rocking chair and post them.  Mine do not rock as much for safety reasons and the reason for the larger radius.  It is very easy to have a child rock themselves backwards.

Friday, October 19, 2012

I wish I would have known

A few weeks ago I lost my lass grandparent.  It was kind of expected, but he always had a funny remark or did something to brighten your day.  He was a good father and grandfather and friend.  He was also the jack of many trades. 
Among his personal belongings was a box that he made while he was a Trail Builder.  Now I didn't know what that was or what they did.  Apparently before the 11year old scouts, (Which I am the scout master for now) and before the Blazer Scouts, (which was the program I was in) was the Trail builders.  In my Grandfather's box was his log of things he had to do to receive the various patches.  Some of them were quite funny like, bushing teeth and hanging up his hat.  I was fun to see his writing and his mothers writing.

Here is the instructions on how to build the box
My grandfather penciled in "Trail Builder" on the top.  You can actually see the pencil marks because of the flaking paint


Here is one of the trees he stenciled in.

Part of making the box was understanding the wood used and how it was manufactured.  He also signed his name under the lid.  Unfortunately the box has been weathered and the paint is chipping off. I hope that I can put a clear coat and save what remains of the paint job.  There will have to be some minor repairs also.  A lot of the glue bonds have deteriorated.  It is amazing how much time and care he put into this box and it is one of the few things he saved through his entire life.  I don't know if I can say that I have something from when I was 10 years old that I have made.  I take that back, my mother has several ornaments that I made much to the dislike of my siblings. As they fall apart we get rid of them.

Saturday, September 8, 2012

Transforming Trucks

This is the first of several designs in the Transforming Toys book I received two years ago.  I thought I would have more done by now but I am happy to have one.  The basic concept of this toy set is a bunch different size blocks with various patterns cut into them.  They all have the same center hole drilled into them big enough for a 3/4" threaded dowel to go through.  There is a wooden nut for each end of the threaded dowel to hold the vehicle together.  My eldest son helped me put some of them together.  It is age appropriate for him but not for the youngest.

This is the pick up truck
 The wheels attach like a tinker toy.  The book said to use a thin kerf table saw blade and a jig.  I used a band saw.

 Here is the Coupe
 Tanker truck
 Bus
 Log truck
Think of all the possibilities with all these pieces.  I would say the possibilities are endless but the threaded dowels are only so long.
It was not a difficult project, but it was a good project to learn some things about the precision of the transforming toys. It also got me use to the lay out of the book.  I am not one abut following the instructions much but on the more complex toys I tend to be following the instructions more.  For those that are interested the main wood used is Poplar. The accent wood is walnut  and the dowel and nuts are maple.  Now on to to the lessons:
  • When centering a hole on the block measuring from one side does not cut it.  I was off by about 1/32 of an inch.  Just enough to offset the blocks when they are put on the dowel.
  • Dowels at the local hardware store are not the dimension they say they are.  They are about 1/32 -1/16 of an inch over sized.  This is enough to not work in my treading tool.  Very frustrated with this because it means that I have to go to Rockler to buy the dowels.  Here is my feeling on Rockler:  They really like their stuff.  It tends to be on the pricey side especially their lumber.
  • Double check the dimensions in the book.  For the most part they were right.  One critical one for the length of threaded dowel was too short for the tanker.  The other was the length of the wheel axle.  More of a frustration than a show stopper.
  • Making threaded dowel is more work then just turning a tool around a dowel.  The grain on the dowel is also important.
Kids are having fun with in and that is what counts.

On the "sand it till it looks right" toy, here is the next step:
Does it look good? 

Sunday, September 2, 2012

Who Needs Geometry?

Schools is just a waste of time, right?  Everything you see in the picture I learned in my 9th grade geometry class.  Yes, I am a geek.  Yes, I aced the construction chapter of geometry which is the mess you see in the the circles.  For those of you who were wondering, geometric constructions are ways to divide, make angles, copy, and make parallel and perpendicular lines with a compass and ruler. Sometimes it surprises you what you use from school.