Showing posts with label Tool review. Show all posts
Showing posts with label Tool review. Show all posts

Thursday, August 25, 2022

Saburrtooth Burrs

 I am going to try some intarsia projects this year. A lot of them will require shaping and detailing. Some of which I can do with sand paper but others I need to take a lot off. I have used the sanding drums on the Dremel and some of the carving tools that come with the Dremel. I have been watching some videos on the process and someone recommended the saburrtooth brand burs. They were a little more then I hoped, but not unreasonable after using them. The set was about $100.

I have used them on creating deeper profiles on some animated toys that I am making. These things will take material off. These look like little medieval weapons. The will not do a finish ready surface and I will say you will start at a rougher grit sand paper to get it ready. It beats the tool wear that happens on the Dremel carving tools. I would burn them up as well as the sanding drums before finishing the part.

Monday, March 30, 2020

Tools in Review



With the move across the country and a new job, I have had to purchase some tools that I have lost access to or just left behind. Here are some highlights.

A new lawn mower
I decided to ditch the gas lawn mower and left it in California.  I have heard good things about the Greenworks system and that is what I went with.  I have the lawnmower, edger and blower that work all on the same battery.  I have not been disappointed.  To be fair I have not mowed my entire lot in one go.  The single battery is able to cut the entire front yard.  I don't have grass in the back so not sure if it will do both.  To put things in perspective, I have a half acre of land.  This is the first time that I have had a self propelled mover.  It is nice to say my youngest had fun "pushing" it by himself.  Now he just needs to learn how to turn.




New Planer
I went with the home  brand standard of the DeWalt DW735.  It is a good planer and had access to one at my previous job.  I had always thought I would get the Shelix head to go with it.  But then there was a realization.  The new head would cost about $500.  New blades are $55 each and they are sharpened on both sides.  If I would replace them every year (this is a guess), It would take me 10 years to pay for the Shelix head.  By that time I may want to upgrade or go a different route.  While the Shelix is a good cutter head, I don't see the need to drop the money on one right now.  This may change now that I have to buy my lumber in the rough not surfaced two sides.  The biggest issue, and it is big, is that it does not hook up to a standard shop vac hose.  I am not sure what the connection is but I am taping the hose on right now.



New Cordless Tools
I broke down and got new DeWalt drill, diver and circular saw.  My old drill was no it's last legs and needed to be replaced.  Not much to say with the systems that I purchased.  The drills are smaller and easily used by my kids.  They helped me repair the fence.  The circular saw is a game changer.  Needed to cut a 2x4 stud to length and I didn't need to go to the chop saw.  I will say that the saw is a battery drainer.  I have two 2 amp batteries and it will drawing the batteries cutting down sheet stock.
New Hand Tools
This was the reason that I went to the Woodworking Show.  I picked up a hand saw and marking gauge at Lee Valley.  I am looking to do more traditional joinery on some furniture that I am making and these are kind of important in the laying out consistent marks.  I also picked up a square and marking ruler at Wood Peckers.  I know that these are square and it is amazing on how far off my other marking tools are.

Tuesday, October 29, 2019

New Dust Collection




It has been a long time coming, but I needed to upgrade my dust collection.  It wasn’t hard to do since it was a shop vacuum that I used occasionally to clean up.  I could hook it up to most of my tools but it was a pain to do so.  Cleaning the container and filter out was also cumbersome and dusty.  It seemed easier to just sweep it up at the end.  That is what I have done since I have started. 
Inside the shop vacuum
Inside the bucket
I have been looking at several dust collections.  I don’t have the area for a stationary system or the ability to run fixed line so I settled on another shop vac.  I like that I can use it to clean out the cars and for a duct collection system.  The addition was the dust stopper that goes on a Home Depot bucket.  The idea is that the bucket collects the majority of the dust and the large particulate.  The vacuum stays pretty clean.
I have not had a lot of opportunity to use it.  I am in a finishing cycle right now.  I did hook it up to the belt sander when I was sanding blocks. It was doing a great job on collecting the dust in the bucket, so I am happy.
The one thing that I did notice is that I cannot plug the vacuum and the tool in the same circuit. The current draw is too great on a 15 amp circuit.  Good think I have two lines in the garage.  For the small shop this is has been a great addition and would recommend it.

Branding Iron



It was recommended that I purchase a branding iron to mark my work.  I have thought about it for some time and made the purchase.  I took my logo and took out the car in it.  I submitted it to a couple of online vendors that had good reviews.  One said they needed a specific vector format that I had no clue what they were talking about.  The other said they could work with the file.  I even asked about the thin lines and they said they could do it. So I went with Branding Irons Unlimited.  They were patient with me and helped me out on what I needed. 
Here are a couple of things that I learned from the experience:
·         They will send you a proof of the actual size of the brand.  If you do not like the size, go to a copier with a reducer/enlarger to find the right size.  It makes it easier on you and on them.  I thought I wanted my logo to be ¾” tall.  That made it huge.  It took a couple of tries but I found the right size
·         Do not brand finished product.  I thought I would brand everything that I had in inventory.  The finish (shellac) came off on the brand and made it more difficult to brand.  It all burned off and the branding iron is clean now.
·         There is some fiddling with the temperature.  Use lots of practice pieces.  I still screwed up several brands.  Little temperature changes seemed to also have dramatic affects.
Overall I am pleased with the purchase and like how it turns out most of the time.  When done right, the brand comes out clear.

Saturday, January 19, 2019

Triton Router


So I was able to use the triton router for more than just some profiling.   I needed to make some sides for the bench that I am refurbishing.  This required making a template and copying it to the solid panels for the sides.  Besides the epic setup fails the router worked great.  Quick grip clamps do not have the holding strength to hold the pattern in place while routing.
I have the TRA001 3 ¼ hp model.  There is plenty of power in the router.  I was cutting 1” oak and it did not bog down.  Probably the best example of power but it is more than enough for me.  Here are some of the features that I really liked.  The soft start:  It a slow start so there was not a lot of torque twisting out of my hands at the beginning.  Single wrench bit changing:  It is always nice to only need one wrench to change the bit and I did not have to hold a button to lock the spindle.  The ease of taking it on and off the table: I have to loosen a couple of thumb screws and the router can be unlocked from the table.  It is the same with putting it back on.
Here are a couple of things that I noticed and took a little while to figure out.  The router is not intuitive to use.  The spindle locks only when the bit is fully extended which locks the spindle and the bit is able to be removed.  The depth adjustment takes a little bit of getting used to.  There is an indexing and a plunge setting that take a little bit to get used to.
I am looking forward to trying out the table and all the features of the precision fence system.

Sunday, August 19, 2018

New belt sander


I just received a new belt sander.  My last belt sander was on its way out.  It lasted over 15 years and it served me well.  I decided to go and get the Grizzly 6” belt sander.  It is a step up from my 4”.  I looked at the shop fox and the jet belt sanders.  The issue that I had with the shop fox was the box stand.  It looked good but it would take up too much room.  The electrical ran through the box so there was no way of separating the sander from the base.  The Jet had a lot of negative reviews for the disc sander part, the two things that drove me away was the reviews that it had a lot of plastic so it was light and the price.  The grizzly sander also has some problems but I felt it was the best choice for the budget I had. 
There were things that I liked out of the box.  It was noticeably heavy.  Most of the parts were cast iron.  The drive on the sander is a v-belt.  It makes it easy to replace.  I would have preferred to have it direct drive from the motor.  I like the size of the sanding table and that it can be moved from the disc and belt sanders.
There are a couple of annoyances.  The housing around the disc sander is sheet metal and was bent during shipment.  It is not that big of a deal because it can be bent back, it is just something that I would expect to do in for a new piece of equipment.  The top hood also moves when it is touched.  It is usually touched when adjusting the angle of the belt other than that it is not a problem. 
The one problem that I found was the on/off switch is on the back side.  I would have liked it in the front of the belt side but it is on the back. 
I also purchased the bear claw rolling cart.  I have to say that I like the stand a lot better than the shop fox version.  The locking mechanism is so much better.  It is a little more cumbersome to put together but the product is better for the price.
I have only used it a little bit but have enjoyed it.  I am not disappointed with the purchase.



Wednesday, May 23, 2018

Since I got a Hand Plane


Last year, I decided to purchase a couple of hand planes to help me understand how they worked and to allow me a little more flexibility.  I purchased Lie-Nielson low angle jack plane.  I honestly did not think I would use it as much as I do.  I built a storage cabinet and put it, with my sharpening tools, in the back.  It is a rolling cart, so it is not a big deal to get back there, but it is an extra step.
I am amazed how much I use it and how much easier it has made certain tasks.  Just recently, with making a smaller version of a train, I needed to add a flat to the boiler.  Last time I did this I mounted the dowel to a board and cut it on the table saw.  This time I mounted to the table saw and used the fence as a guide.  With a few passes I had a nice flat on the dowel to glue to.
I was making several cars to donate and I had some re-sawn board that had a warp and twist to it.  I did not think much of it because I was cutting them down to about 2” wide by 8” long.  After roughing out the parts I realized I did not run the board through the planer to clean up the band saw marks.  It probably would not have done well because of the warp and twist in the board.  The parts were now too small to run through the planer.  With a couple of passes on the plane and the boards were flat and ready to be cut out on the scroll saw. 
One of the best things that I did was go to a show and get hands on experience with the planes.  I was shown how to set them up and how to take care of them.  I was shown how to sharpen and what the edge of the blade should look like.  I learned some tricks and what to look for.  Best of all, I felt what a tuned plane should feel like and what to expect when using the tools.
 

Triton Work Center Table Saw TWX7 Contractor Saw Module

Part of my son’s winnings was the table saw module for the work center.  This was the first piece that I tried out. Overall, not bad.  I have my opinions and I was comparing it to my 20 year old Dewalt contractor’s saw.  I will start out with my issues and move on to the things that I really liked about it.
This saw is meant to be a portable contractor saw.  Triton does a good job on the specs on their website, so I am not going to give all the specs.
Disappointment: The only thing that I really had a problem with was using the riving knife making blind cuts or narrow rips.  The blade guard and anti-kickback pieces can be removed and the riving knife can be lowered.  However the riving knife interferes with the dust port so the blade sticks out about 2” at the interference point.  So I have to take the entire assembly if I want to rip thin stock with my gripper push block.
Concerns: I was ripping a lot of poplar for toys and noticed the quality of cut was getting worse or down right awful.  One reason was the set screw on the fence became loose.  In general, the quality off the saw was worse than what I experience off the Dewalt.  It took more than a few passes with a plane to clean up the saw marks on the edges.  I am still going to remain optimistic and try a new blade rather than the one that came with the saw.  I will continue to adjust to see if I can get a better cut off the saw.
The saw was also a little tricky to install the first time.  It is not a big deal but I thought it was put the pins in the groove and the lower the saw down onto the table.  The motor needs to go in first and then put the pins in the groove.  From a design standpoint, I get it.  It was a “oh the saw doesn’t fit” moment to the realization on how it is supposed to go in.
The fence has two sets of marks on the plastic sight.  One red and one black.  This is because the saw can be set up for both right and left handed users and there is no reduction in capacity depending on how the saw is set up.  That being said,  I had to be very careful that I made sure the same color mark lined up to the mark on the other side.  I did screw that up once.  The other minor concern is the default setting for the sight is all at one end instead of centered.  Not a big deal but could become a problem if I need to adjust.  The fence system is also problematic if slight adjustments need to be made
The throat plate on the saw is beveled into the saw.  This does not great a problem if cutting larger pieces.  It will be a problem doing dust cuts and veneers.  The taper can make small pieces wedge into the blade and get stuck.
Limitations:  This saw does not accommodate for a dado stack and blind cuts are out of the question.  Most contractor saws do not accommodate a dado stack.
Surprises: The fence system was a surprise to me.  I went in very apprehensive to it.  I did not think it was a very good idea to have a fence that can be installed very crooked.  I even cut out strips to the size I was going to cut so that I did not have to measure front and back of the blade.  I stopped using them after two sizes.  The fence system was accurate and worked well.
It was easy to set up and most of the parts came assembled.  It wasn’t awkward to move around and was lighter than I expected.  Adjusting the blade and angle were less cumbersome than I thought.  The handles are a little deeper then I was accustomed to. 
The miter gauge was the best one that I have seen come with a piece of equipment.  I currently own an incra miter gauge and was excited to use it in a t-slot.  The Dewalt does not have a t-slot (at least 20 years ago it did not).  When I saw the miter gauge that came with the saw I was equally excited to try it out.
The assembly instructions are bad.  They are wordless and have multiple steps in one picture.  However their YouTube instructions are amazing and thorough.  They even go through and show adjustments and fine tuning of the product.  Customer service is also very helpful with questions.
Overall Performance: The saw has good power and solid design.  I was please how it worked and for a contractor saw.  I was able to cut several linear feet of both 4/4 and 6/4 poplar.  The setup and changing of rips went smoothly once I trusted the fence system.

I do like the ease of removing the guard and anti-kickback system when it interferes with a cut.  I told my wife that I will leave these on when I can.  The Dewalt guard was a pain to take on and off and ended up in the recycle pile.  

Friday, April 6, 2018

Wen Drill Press


 A spring on my drill press broke a couple of weeks ago.  I was hoping that I could replace it.  It would have been an inexpensive part with a little bit of difficulty to replace.  However, the part is no longer stocked and cannot be replaced.  I thought I would just deal with it.  I quickly learned it is not smart to use a drill press where the chuck lowers by itself.  It makes adjustment difficult and setting the depth stop even harder.  Not to mention it is not very safe.

I really wanted to upgrade but could not justify it.  While looking online I found several that would work.  The WEN 10 drill press at Home Depot stood out.  Not because some of the new features that my old one did not have but because of the spindle travel.  It was 2 ½” while all the similar drill presses were 2 3/8”.  I know it is only 1/8” but that makes a big deal when a lot of my toy chassis are 2 ½”.  The other neat features include laser cross hairs and an LED light.  Not something I was looking for but a nice to have.

The drill press shipped to my house quickly and was undamaged which was a good thing.  The laser cross hairs line up with the hole.  They become a “V” when a drill bit is put in them.  It is also fairly accurate. The LED light worked.  At first, I was frustrated the LED light did not have an on/off switch.  I found it a couple of days later.  I was impressed how quite the machine was wen used.

Overall it was a good purchase.  We will see how long this drill press lasts.  The last one was almost 15 years.  No complaints from me except for the timing.