This is another pattern that I found on the web. Thought it looked interesting and I had some scrap that I could try them out on. I like the idea. My execution and final assembly was not good. My hole for the ribbon was too big. I drilled it at 1/4" and I should have made it closer to 1/8". I think the patterns could have used a little work also. Not all the pieces lock together. It is a pet peeve of mine if they don't. Painting them was not difficult and added a nice touch. I don't know if I will do these again, but I might actually take the idea to some line art in the web. I also might consider making them bigger and changing some of the lines. Again, I liked the idea and the concept is good. I fault myself on the execution and look.
Projects and discoveries from an obsessed woodworker who likes to make wooden children's toys
Showing posts with label Decoration. Show all posts
Showing posts with label Decoration. Show all posts
Tuesday, October 13, 2020
Tuesday, October 6, 2020
This Year’s Christmas Ornament
This was a crazy year for me. I had the nativity ornament already picked out. The wood choice for the family ornament is poplar. There is not much special about poplar. It is considered a hard wood even though it is pretty soft. This wood is always in stock in my shop because it is what I use to make the toys that I designed for the first time. It is also what I make most of my toys I donate. It paints very well and is inexpensive. Poplar will always have a place in my shop.
That is this year's ornament.
Wednesday, January 15, 2020
My Last Project in California
Phone Stands
My last project in the current shop was a couple of cell phone holders. I have done one in the past but this time I cut out a butterfly on the top of it. The other was an easel that proved to be more complicated that I had hoped. The size of the easel made the angles very shallow and I did not want to feel like it was going to fall over. The other thing that I did not realize was the dimensions of the stock. I originally went with 5/8” thick stock but that looked too thick, but ½” was too narrow to hold the phone. I actually needed to be creative to make the ledge look thinner than it actually was. That is what angles are for.
The tricky part was the drilling the holes. I drilled one and then used tape and super
glue to hold it all together to make sure all the holes lined up. It actually worked really well. This was a lot of compound angles. For the most part I sanded to a line. The project made me think a lot about the
angles and order of operations.
Saturday, September 28, 2019
The Built in Cabinet Install for a Friend
A couple of months ago, a friend of mine asked if I could
help with replacing a lot of their cabinets due to water damage. I agreed and the process was started. It is good that I work for a cabinet company
and run the sample shop. That made the
cabinet parts easy. There were three
parts to this project: the bathroom, built in hall cupboards, and a laundry
room.
The easiest was the bathroom install. It was a standard cabinet off the shelf. We their current cabinet was 31” tall and I
replaced it with a 33.5” tall cabinet.
So the mirror had to move up and the wall soap dispenser had to be
removed. Other than that pretty easy
install. It was nice installing some of
our cabinets for firsthand experience.
The built in was all custom cabinetry. The heights and
widths were fine but the depth was 20”, not standard. This is where the sample shop came in
handy. I removed all the toe kicks from
the units so I could change the height.
I also was able to cut the back side of all the cabinets to 20”. That was the easy part of the install. When I measured for size, I measured the back
of the cut out to the floor. The back
was higher than the front. The right
side was lower than the left and the left wall was out of plumb by 3/8”. Needless to say there was some pushing and
shoving and beating until the pieces were in place. I am also glad for fillers and moulding. It was definitely used.
The laundry room unit was two standard kitchen bases. Sounds easy until the dryer ductwork went
behind the cabinets and the plumbing went through the cabinets. It was a lot of cutting and at times was
nerve racking. It went in well until I
installed the door and drawer next to the wall. They hit the door frame. I had to move the entire unit over one
inch. Thank goodness for fillers. Overall they were happy with the outcome and
I was happy it was done.
Here are some lessons learned. Tools are heavy and I don’t like carrying
them around. I am glad my son won the
Triton competition because that is the most modular table saw and workbench I
have (on loan from my son). I am
realizing the value of battery operated.
I could have avoided hauling around my air compressor if I had battery
operated nail guns and they do exist. If
I was in the business it would be something I would be looking at. Nothing is ever plumb or square and moulding
helps out. I am sure there are tricks
that I don’t know about but the job was completed and I am glad that I was able
to do it. Not sure if I will do it again
soon and it will not every become a career.
Family Reunion Ornament
This summer my family got together for my grandfather’s
birthday. He passed away several years
ago but since it would be his 100th birthday it was decided it would
be a good reason to all get together.
The last time that we were all together was 20 years ago. A lot has happened since then. If my grandparents were still alive we would
have had 4 generations there. We went to
a ranch in central Utah over the July 4th weekend. It was a lot of fun. This blog is not meant to share about my
family so the project that I did was make a Christmas ornament.
Wherever my family goes we pick up a Christmas ornament to
show where we have been. I decided to
take the front sign of the ranch and modify it to fit the family reunion. I pasted the pattern on 1/8” plywood and
started cutting. I needed 19 and so I
stacked 5 together and cut them out.
Looking back 5/8” thick plywood was a little thick for #3 blades to
handle. I ended up messing up two
stacks. It happens.
These were not the easiest things to cut out but it was fun
to create a pattern.
Monday, March 12, 2018
Arrow of Light
I was asked a little while ago to produce some Arrow of
Light plaques for a local cub pack. I
thought about many the different ways and styles I could use. There was scrolling out the image. I also thought about making a template and
routing it out. Then my laziness kicked
in and decided to go the easer way, CNC.
I have access to a CNC router and since I was making 4 of
them it would be a fast way to batch them out.
Programing proved to be a little more challenging than I thought. By programing I mean drawing it up. For some reason I could not get the parts to
constrain correctly and it kept failing to constrain. Once the drawing was done to my satisfaction
the importing into the machine was relatively easy. One test sample and then four more were
completed in about 20 minutes.
The painting is something that I have done before. It is paint slightly over the lines and then
sand it off. There is a coat of shellac
and that is it. Sometimes it is nice to
have a quick project even if the drawing part was a pain. In the end I learned more about the drawing
program and how to import a drawing into the machine. Usually I just program the machine.
Wednesday, February 14, 2018
Photocopy Rubbings
So I tried to do a photocopy rubbing on the wood chest of
drawers that we purchased for my son. He
is a big Harry Potter fan so I wanted to do one of the Hogwarts crest and one
of the Gryffindor crest. The Hogwarts
was in color while the Gryffindor was in black and white. Looking online they suggest lacquer thinner
or acetone. I purchased lacquer thinner
and I had denatured alcohol at home.
My results were, denatured alcohol does nothing. Lacquer thinner worked a little bit but it was
tough to rub out. I still need to try
acetone to see how that works. The color
did not work at all. I might try the wax
paper and inkjet printer if I want to try color again. If you want to find out more, there is plenty
of information on YouTube. As things
work I will continue to update.
Monday, November 27, 2017
Lots of Ornaments Craft Fair
So I have been cranking out Christmas ornaments for the past month in hopes to have some sort of inventory for the two upcoming craft fairs I have. Putting a deadline to something is nice but I have to admit it took a little bit of the fun out of it. So I put a little fun back into it. There are two Ladies that I have had the pleasure of working with on this craft show circuit. I have learned a lot from both of them so I added a couple of ornaments that are for them. I learned about another Christmas tradition from another part of the globe; forget elf on a shelf. I also did some ornaments that I would not typically do. Glad that I am ready for the craft fairs. I hope they go well.
![]() |
| Purple heart and birch plywood. I figured I needed some fancy ribbon for the hanger. |
![]() |
| Two new Nativity ornaments. I am going to have to take off the hat that baby Jesus is wearing on future ones. |
![]() |
| Just wanted a little variety. Thought these looked fun. |
![]() |
| It is fun to have friends that inspire. These are not for sale for copyright reasons. |
Monday, December 5, 2016
2017 Christmas Ornament
I found next year's ornament early on and so I have already started cutting it out. This year the wood is pine. I have had problems in the past with blow out and chipping on the back side. I had some 1/8" hardboard so I decided to put a backers on the stacks in hopes to minimize the chip out. It worked, but I had these ornaments of thin board. I could just throw them away, but I decided to practice on them. I wanted to try something else in my air brush other than shellac. I found some pearl gold air brush paint at a local craft store. I used 1/2 a bottle on the nine ornaments. Looking back, I do not think my settings were correct. The paint was a lot thinner than than shellac. I should have dialed back the amount of paint going through the nozzle. They turned out ok. The paint was not as consistent as I would have hoped, but that is my fault.
This weekend was not as optimal as would have hoped. I had a lot of finishing to do and several projects are presents. This was the last finishing day I had before they needed to be shipped out. While I was setting up in the morning I heard a loud weird noise. Looked around and did not see anything out of the ordinary and continued to set up. The neighbor across from us was setting up for a yard sale and came over. He asked if I knew there was a downed power line in our yard. Upon inspection there was a downed line in our backyard. The live end was in the neighbor's yard, but my yard was still off limits. We went and did a couple of things as a family. When we came back, the wire was cut back but not repaired. Good news was the power was still on. So I started my finishing. Half way through my first coat the power was cut. They estimated it would be turned back on at 8:30 in the evening. I used what air I had in my compressor to clean my air brush and clean up. Now I have to figure out how I am going to finish these presents in time.
Thursday, October 27, 2016
New Ornaments
Our family picks up an ornament from the various places we visit each year. It is kind of our travel log. My son has attended a Project Surf Camp for a couple of years. This year he came home and requested and told us that we needed a project surf camp ornament for our tree. He actually drew one out, but it was lost. I talked with him about making the sticker we received an ornament. He was ok with the idea and this is what came out.
I tried using a spiral blade on the top lettering. It is the first time I have ever used one and didn't really like it. I did not feel like i had good control over the blade. It stretched when I put tension on it and the end bent all over the place making it difficult to insert into the pilot holes. I don't know if I will be using them again. Other than the upper lettering I am happy with how it turned out. It was a lot of holes and I was in constant fear that I was going to cut through and ruin the piece.
The ornament of Yoda is because I found a picture online and thought it would be a fun cut out. Sorry I cannot sell it the image is copyrighted. But you can make the snowflakes from their webpage.
I tried using a spiral blade on the top lettering. It is the first time I have ever used one and didn't really like it. I did not feel like i had good control over the blade. It stretched when I put tension on it and the end bent all over the place making it difficult to insert into the pilot holes. I don't know if I will be using them again. Other than the upper lettering I am happy with how it turned out. It was a lot of holes and I was in constant fear that I was going to cut through and ruin the piece.
The ornament of Yoda is because I found a picture online and thought it would be a fun cut out. Sorry I cannot sell it the image is copyrighted. But you can make the snowflakes from their webpage.
Monday, September 26, 2016
2016 Christmas Ornament
Thursday, June 9, 2016
Teacher Gift
It is the time of year that we thank the teacher that put up, challenged, disciplined, and help teach our kids. This year we planned a little bit earlier than previous years. I found this in one of the puzzle books. It came with 18 pieces and it was easy to modify to 14 so it was one per kid in class. Each member of the class wrote their names on one side and drew a picture on the other. My son's teacher didn't know what was going on even though she did a piece. It was a nice little project glad we did it.
We did find out before finishing colored pencil does not run but marker (all including sharpie) ran when the finish was applied. So the names got a several light coats. In the future I would use a water based finish but still use colored pencils for the drawings
We did find out before finishing colored pencil does not run but marker (all including sharpie) ran when the finish was applied. So the names got a several light coats. In the future I would use a water based finish but still use colored pencils for the drawings
Monday, June 6, 2016
Domino Set
I was asked to make a domino set sightly different than the one that I had previously made. The main difference was the size. This was 3/4" thick, 3 1/4" wide and 6 1/2" tall. There was an additional inlay that I did on this set that was not done on the first set. The horizontal dark line between the dominoes proved to be more challenging than I had planned. I first cut the strips for the inlay and those were not all the same thickness even though the setup was all the same. This was a good thing because my grooving in the to accept the inlay was not all the same either. I am not saying they were off by a lot but it was enough that a snug fit on one was a loose fit on another. Then there was the ones that I would not even be able to beat the inlay in. Those are easy because I just opened up the groove. I was not off by much, about a business card thickness. I want to attribute it to blade wobble. I use a standard blade but ran the part through twice to center the groove. The second pass did not have a lot of meat to cut into so it may have taken the path of less resistance.The specs on this project are pretty simple. They are maple with a walnut inlay. I finished them in lacquer. I spent a little more time on these then I do on my toys. Mostly for personal reasons. I wanted to see if I good get a nice thick smooth film finish. I did. They looked great. They have three coats of lacquer with sanding at 220, and 440 between the coats.
I also made a box for the set. I tried to make the length a close tolerance and the sides a little more loose. In hind sight I should have done it the other way around. The three coats of lacquer over 28 pieces made enough of a difference to make them tight. They still all fit and looked beautiful but it was tight enough that if the wood moved a little they would never come out. So I sanded the back side of all of them down and re-applied the finish. Now they fit great. Note to self: Need to think about finish thickness items.Business Card Holder

I was sitting in front of my computer at work and for some reason I was looking at my business card holder. I thought it looked boring. I had just finished the mini cars so I wondered if I could make a business card holder that fit me better. It is designed a lot like my stake bed truck. It was a quick project and took a couple of hours to design. I made it out of maple and walnut because they are my favorite wood combination in my price range. It was a fun little project and would like to do more of these unique, one off designs. Plans are available, just ask me and I can send them to you.
Tuesday, December 1, 2015
Old Tradition Revised
When I was young, my parents took the Christmas tree and hung it from the ceiling. It sounds odd but it was very practical. How many stories are there on social media of kids and pets knocking over the Christmas tree. This tree hung the fragile ornaments and some of the handmade ones collected over the years. Now with toddlers of my own, I want to have ornaments on the tree without the fear of some of the more fragile ones being broken.
The hanging tree was not really feasible in my place so the next option was to make a hanging tree. The objective was to have a place to hang the fragile ornaments that we as a family are collecting through our adventures. The wood is bass wood so that I can put pins in it and gives a nice display piece that can be hung on the wall. I made two because there are only going to be more family adventures.
The other piece that is almost completed is the display case for the nativity keys. I have been asked how I am going to display these keys. Well this is how.
It is is a walnut frame that has the saying "For unto you is born this day a Savior which is Christ the Lord". I like how it came out. Glad I did it. Sorry, I don't have more detail pictures on the lettering. They came out blurry.
The hanging tree was not really feasible in my place so the next option was to make a hanging tree. The objective was to have a place to hang the fragile ornaments that we as a family are collecting through our adventures. The wood is bass wood so that I can put pins in it and gives a nice display piece that can be hung on the wall. I made two because there are only going to be more family adventures.
The other piece that is almost completed is the display case for the nativity keys. I have been asked how I am going to display these keys. Well this is how.
It is is a walnut frame that has the saying "For unto you is born this day a Savior which is Christ the Lord". I like how it came out. Glad I did it. Sorry, I don't have more detail pictures on the lettering. They came out blurry.
Monday, June 15, 2015
Glass Nativity
I have done a few of these over the years (actually six). These will be the last. They are not as difficult as they were time consuming. There was also a lot of take away lessons from doing glass etchings.
My dad did the original and several others for other people several years back. I wanted one about ten years ago. He had lost the pattern so with a light and paper I copied it. His was done on tinted glass. I was told that tinted glass made the etchings look better and the image stand out. So I went and picked up my glass, etching solution and contact paper. First lesson: NEVER use easy remove contact paper. The etching solution lifted the contact paper and I was left with a completely etched glass. That alone should have been enough to deter me but I had more etching solution left, so I tried it on a much cheaper mirror with the correct contact paper and it worked. I made two this time because I cut down a full length mirror from Walmart. I have one and the other is at my in-laws.
A few years back the one my father did at my parents home broke. I decided to replace it with a framed mirror one. Put the contact paper and made all the cut outs and then let it sit. I found it last year and finished it. Lesson two: The longer contact paper sits on a surface the more adhesive sticks to the surface. I think I peeled off pure vinyl and all the adhesive stuck to the mirror. I used a quart of goof off to remove all the adhesive. It was given as a Christmas present last year to my parents. My siblings all wanted one.
I had enough etching cream for three more. I was not going to buy any more because the stuff is expensive and I really do not like working with glass. So learning from past experiences I used the contact paper I had left over and did three more in about two weeks. Lesson Three: As contact paper gets older, the adhesive does not stick well to the vinyl. This is a little different than lesson two. As I was cutting out the contact paper for the etched sections not all the glue came off with the vinyl. leaving a little bit of residue. I cleaned most of this residue up. The etching solution did not etch the mirror where there was glue left. Most of these are small little dots, so to appear to be beauty marks of a handmade piece.
I also made all the frames for these nativities. These are beech, stained ebony with a coat of shellac. The frames came out nice even though I hate to make miter stuff. I only had one of the three frames be a problem. So in conclusion, lesson learned: No more glass etchings.
A few years back the one my father did at my parents home broke. I decided to replace it with a framed mirror one. Put the contact paper and made all the cut outs and then let it sit. I found it last year and finished it. Lesson two: The longer contact paper sits on a surface the more adhesive sticks to the surface. I think I peeled off pure vinyl and all the adhesive stuck to the mirror. I used a quart of goof off to remove all the adhesive. It was given as a Christmas present last year to my parents. My siblings all wanted one.
I had enough etching cream for three more. I was not going to buy any more because the stuff is expensive and I really do not like working with glass. So learning from past experiences I used the contact paper I had left over and did three more in about two weeks. Lesson Three: As contact paper gets older, the adhesive does not stick well to the vinyl. This is a little different than lesson two. As I was cutting out the contact paper for the etched sections not all the glue came off with the vinyl. leaving a little bit of residue. I cleaned most of this residue up. The etching solution did not etch the mirror where there was glue left. Most of these are small little dots, so to appear to be beauty marks of a handmade piece.
I also made all the frames for these nativities. These are beech, stained ebony with a coat of shellac. The frames came out nice even though I hate to make miter stuff. I only had one of the three frames be a problem. So in conclusion, lesson learned: No more glass etchings.
Monday, January 5, 2015
The Ornament Nativity
So this year I made ornaments that had the same design as the boxes I did last year. This was still a pattern with a lot of detail. I was kind of rushed to do them because I put it off till the last minute. They turned out nice, I am not so sure I like the ribbon on them.
There is one great lesson I learned from this project. To preface, last year I learned that painter's tape between the wood and the pattern makes the pattern come of cleaner and easier. This year, I learned that if I put packing tape over the pattern, the pattern does not peel away from the wood when it is being cut. Supposedly it prevents the wood from burning, but it kept the pattern from vibrating while being cut.
Not sure what to do next year. I do not think that I will be able to out do the past couple of years.
There is one great lesson I learned from this project. To preface, last year I learned that painter's tape between the wood and the pattern makes the pattern come of cleaner and easier. This year, I learned that if I put packing tape over the pattern, the pattern does not peel away from the wood when it is being cut. Supposedly it prevents the wood from burning, but it kept the pattern from vibrating while being cut.
Not sure what to do next year. I do not think that I will be able to out do the past couple of years.
Tuesday, December 9, 2014
Alien Nativity part two.
I do not remember how I came across the shepherds plan but I did. The bad thing is that I ordered the wrong size. I ordered the yard size instead of the table top size. Seriously, the large shepherd was over 30" tall! I shrunk it down to make it look the same size. I cannot see how that could be cut out with all the curves. Anyways, this was a nice little addition to the alien nativity. It came out nice and seemed a lot easier than the original, probably because I have done a lot more scroll work since the first one.
The only issue is the color does not match. Wood does age over time. It will take some time for the shepherds to match. This was recently displayed at a creche festival by my house. There were lots of nice displays there.
Friday, February 14, 2014
A Stick to Measure With
There are a couple of things that I need to confess with this stick. First is that this project came from a Facebook post that I said I can do better one to my wife. I am not opposed to improving on someones design, I am opposed on openly saying that "I" can do better than someone. If I constantly compared myself to some of the other top woodworkers I would be one depressed woodworker. I am content with what I am capable of doing. I know there are people that look at my stuff and are amazed. There are others that think my stuff is acceptable at best. It is not my place to say "I" can do better than "you". Anyone who accomplishes something deserves the satisfaction of completing the project. I hope that everyone feels the satisfaction on completing a project to the best of their abilities. I have access to tools and equipment that others do not.
My second confession is I cheated. This is probably why I feel so guilty about saying I can do better than the one on Facebook. They painted and stenciled the one they made. I used a CNC router. My work just purchased one for use in the department I work in. To help learn the programing there was some permission granted for personal projects. This was mine. I seriously took me about an hour to program. Three days and four test boards later I figured out the feed rates, depth of cuts and what text looked good and machined well. Not only does the ruler look good but it is accurate to the 0.2mm (0.00787 inches). However the markings are made with a 1/4" ball mill so the margin of error is +/- 1/8". It was a fun learning experience.
On the back I put the current hand and foot prints of all the kids. It is kind of hard to do all their baby prints. The board is solid maple. I finished the routs like I did in the dominoes. The project came out beautifully. Now we get to mark it up. This is one thing I hope the kids fight over when I die.
Overall I will probably using the CNC to add personal touches to some of my projects again.
My second confession is I cheated. This is probably why I feel so guilty about saying I can do better than the one on Facebook. They painted and stenciled the one they made. I used a CNC router. My work just purchased one for use in the department I work in. To help learn the programing there was some permission granted for personal projects. This was mine. I seriously took me about an hour to program. Three days and four test boards later I figured out the feed rates, depth of cuts and what text looked good and machined well. Not only does the ruler look good but it is accurate to the 0.2mm (0.00787 inches). However the markings are made with a 1/4" ball mill so the margin of error is +/- 1/8". It was a fun learning experience.
On the back I put the current hand and foot prints of all the kids. It is kind of hard to do all their baby prints. The board is solid maple. I finished the routs like I did in the dominoes. The project came out beautifully. Now we get to mark it up. This is one thing I hope the kids fight over when I die.
Overall I will probably using the CNC to add personal touches to some of my projects again.
Subscribe to:
Posts (Atom)










































