Wednesday, April 9, 2014

Front End Loader

This is the next piece of equipment that is in the Wood Magazine construction series.  I think that I am getting better at these.  They are not as hard as they use to be but they still provide a challenge.  It is all made out of walnut and maple.  Wood magazine is getting more into the different thickness board.  It is getting more tedious gluing up several pieces for a small piece.  There tends to be a lot of waste so that the part can be handled safely.  They still look great and love the design.

 The hardest part of the entire project was sticking this nut on a threaded rod.  I should have welded together when I had the chance.  It is going to come off the first time it is played with.
The other big issue I had with this piece is the wheels.  I just ordered a bunch of 2" wheels because I was running out and these are 2 3/4".  This is not a standard size I purchase so I had to go to Rockler to pick up these wheels.  I guess it was better than paying huge shipping rates for eight wheels but they were still expensive.
I did make a couple of modifications to the plans.  I have a problem with the skip loader breaking where the arms meet the shovel.  This is because the holes, thin board and the grain make this joint very weak.  This is joint is used a lot and has a lot of stress put on it. So I put a cross member and drilled through the length of the cross member for the threaded rod.  This took out the weak grain and the thin board issue.  I also did it on the back side of the arm for the same reason.  I would probably put in an axle peg instead of the threaded rod in area that was just to tight to screw on the acorn nut.
Looking at the pictures I realized that I forgot to put on the roof to the cab.  Something to do this weekend.
Just as a tidbit of worthless information.  This construction set does not go outside; I have worked too hard on it and it is too nice.  I felt bad because even though the set gets played with, carpet and wood flooring just is not the same as dirt.  About a month ago I was planing a bunch of cherry and accumulated a pretty big pile of shavings.  The kids scooped and plowed that pile throughout the garage and had a blast.  I now have a decent size container of shavings so that they can continue to play in when I dump it out.  A couple words of caution: It will get into the house and the shop will be a mess.  It is well worth the trouble.

Monday, March 3, 2014

Working Cleaning Cart

So a while back my wife told me that see wanted a cleaning cart for the kids.  She gave me a couple of pictures to give me inspiration and that was it.  Maybe she thought this would make the kids want to clean.  Of course a traditional cart would not do.  I was walking through a store and one of the Zamboni things was cleaning the floor.  There was the inspiration: I can make it vacuum!  So here is the design.  I am finalizing the drawings for this project now.  The drawings are not going to include the electrical.  I am not going to even pretend that I have any idea of electricity and how to wire this cart up.  I asked a few people and I think it is safe.  At least I know it is grounded.

Basic thought process for this project was put a small shop vacuum on a  platform and use the attachments to turn it into a rolling floor vacuum for kids to push.  I realized there really was not a good attachment for a small shop vacuum for the floor so I designed one.  Thank goodness for the CNC router made it very easy and I could stick to .01" tolerance.  I could have done this by hand but the design would have been simpler and I don't know if the hose would be able to be removed.
Then I figured I might as well have an on/off switch for the vacuum on the cart.  Then the dilemma was if I cut the vacuum cord it would be useless off the cart.  So I needed to install a plug.  This actually gives the cart a little more power because now I can plug another appliance in.
I made sure it had big back wheels.  They are 8" lawn mower wheels.  the front wheels are 2" swivel casters.  I also added a broom and mop holder.

I thought about putting rollers on the vacuum head.  I changed that and put adjustment screws on it.  I am glad I went this route.  I can adjust the head to close to the ground for hardwood floors.  We tried on carpet but it did not work as well.

I did not want to ruin an extension cord so there is a plug installed in the cart to plug an extension cord into.  If I really wanted to I can have a really long cord on this cart.  I was not impressed with the 6' cord that comes on the vacuum.

I know the question that everyone is asking: Does it work? Well....
The suction is not great but it will pick up about  10" of the 15" span.  It rolls and the kids enjoy it.  There are still a couple of things that I would like to do to it.  I have to put the hangers on the back for other accessories.  I probably would have added more buckets.  This allows the kids a place to sort and put their toys in.

Fun project.  Good prototype.  Now what is my next design project?  I don't know but this is what I enjoy.

Friday, February 14, 2014

A Stick to Measure With

There are a couple of things that I need to confess with this stick.  First is that this project came from a Facebook post that I said I can do better one to my wife.  I am not opposed to improving on someones design, I am opposed on openly saying that "I" can do better than someone.  If I constantly compared myself to some of the other top woodworkers I would be one depressed woodworker.  I am content with what I am capable of doing.  I know there are people that look at my stuff and are amazed.  There are others that think my stuff is acceptable at best.  It is not my place to say "I" can do better than "you".  Anyone who accomplishes something deserves the satisfaction of completing the project.  I hope that everyone feels the satisfaction on completing a project to the best of their abilities.  I have access to tools and equipment that others do not.
My second confession is I cheated.  This is probably why I feel so guilty about saying I can do better than the one on Facebook.  They painted and stenciled the one they made.  I used a CNC router.  My work just purchased one for use in the department I work in.  To help learn the programing there was some permission granted for personal projects.  This was mine.  I seriously took me about an hour to program. Three days and four test boards later I figured out the feed rates, depth of cuts and what text looked good and machined well.  Not only does the ruler look good but it is accurate to the 0.2mm (0.00787 inches).  However the markings are made with a 1/4" ball mill so the margin of error is +/- 1/8".  It was a fun learning experience. 
 On the  back I put the current hand and foot prints of all the kids.  It is kind of hard to do all their baby prints.  The board is solid maple.  I finished the routs like I did in the dominoes.  The project came out beautifully.  Now we get to mark it up.  This is one thing I hope the kids fight over when I die.
Overall I will probably using the CNC to add personal touches to some of my projects again.

Monday, February 3, 2014

My First Toy Design

I have been making toys for about eight years now.  They have always been from patterns that I have found on the web or in books.  I have always wanted to design my own line of toys but really never had the time.  There are several projects that I have not done from books and really would like to complete because I think my kids would have fun with them.  There was an opportunity presented for me to make a dump truck cheaper than what a cousin saw on the Internet.  So I took advantage of it.  I have made a couple of dump trucks in the past both with good and bad points so I mixed the two and came up with this.


This is a working prototype.  I combined features that I liked from a plan that I found online awhile back and the construction set that Wood Magazine has been publishing.  The back end is completely mine.  The material is oak and maple.  A little different from what I normally use but the cost of walnut is a little prohibitive on a prototype.  The front is basically the same as the models in Wood Magazine with the exception that I grew the width to 4 inches and set back the block for a bumper.  This is because narrow dump trucks just don't work for me. The fenders are from the Internet truck design.  They are not as ornate but they come from 3/4 inch material.  The Wood fenders are 1 inch thick and really who buys 1 inch material?
The truck bed is mine.  I really did not like a dump truck with a tail flap and I wanted it to hold something round without falling out.  The bucket is made out of 1/2 maple and is re-enforced with oak dowels.  The tipping mechanism was either going to make or break this project.  The Wood Magazine has a stay that falls down with tipped and has to be manually put back to lower the bed.  This is a major fail in my eyes.  It is all about the dump and go.  The other dump truck tipping method; well lets just say I made two of them and both are sitting broken in the toy room because I am tired of fixing them. So I came up with this method.
  
It is all 3/4 inch material so I am not too worried about it breaking.  The piece mounted to the chassis is 1 inch tall  which gives me the clearance to dump.  It is also bored slightly bigger than a 1/4 dowel. The bucket and chassis are doweled together.  None of the pictures show it, but there is a lip on the back of the bucket to hold things in.  The angles are there for aesthetics and I think I did pretty good with the overall look.
Here are some of the upgrades that I did to this design where I think the other designs fell short.
 I pinned the wheels in with dowels.  I do not know why my wheels fall off.  They are glued in and tight fitting.  I am constantly gluing wheels in the trucks I have made even with cyanoacrylate glue (non branded super glue).  They were also supposed to be recessed but drill far enough in one.
I doweled all the thin  board joints.  I have never had a problem with these breaking but it looked good so I did it.  It will give it added strength for shipping.
Things that I did not incorporate in my design:
Smokestacks! These are the weakest part of the trucks.  They break off leaving part remaining and make the truck look broken.  I also left out the mechanical fasteners that Wood Magazine use to tie everything together.  After finding an acorn nut in my son's nose I am a little paranoid about them.  Even when they are glued on the threaded rods kids find a way to take them off.  I used all doweled construction.
So what did this did to me.
I have always wanted to design my own line of trucks.  This would be the first.  However this is not the design direction that I want to take.  This will be a unique build and may not be reproduced.  This pointed me in a direction that I want to do.  I want to create a mid range line of trucks for the ages 3-7.  I have the group of toys younger than that and Wood Magazine has the group older.  I want to be able to make these out of standard lumber with basic equipment.  It will not have the frills of the Wood Magazine but will be more functionality than the basic set I first built.  I don't know when I will get to it but at least I have a direction now.

Wednesday, January 22, 2014

A little power tool crazy?

So I was walking around Lowe's the other day and came across this. 
REALLY? I am definitely in the class of power tools, but seriously this takes it to a whole new level.  I honestly could not tell you how to safely operate this sharpener when it is chucked in a drill. If anything is out of alignment or catches, the pencil or the sharpener  breaks or the drill is twisting out of my hand.
So here are my opinions on the power tool and hand tool note.  I am completely power tool.  I am too impatient and not that detail oriented to use hand tools.  I put my kids crib together with a drill even though the box said no tools needed.  That being said I still expect people to know how to use some hand tools.  It scares me that some people do not know how to use a hammer.  There really is no replacement for a hammer.  A screw driver is another important hand tool to use.  I know all the bits and more can be put on a cordless drill but sometimes that is too much power.  I will not use the cordless drill on changing switch plates and electrical work. Being able to use a hand saw is a must.  Not that it can not be done by a power tool but just for the feel of it.  That is the extent of my hand tool knowledge.
I do own other hand tools.  I have my Grandfather's plane set and he has several planes.  None of them in great condition, but I could not tell you how to use them or how to maintain them.  I have a set of chisels.  I use these to mainly scrap of glue.  I have several hand saws.  I can use them and do use them for rough cutting.  I do not know how to sharpen them and they do need a good sharpening.
The other day I was talking to a coworker about wood working joints.  He has been doing butt joints and wanted to do something with a little more strength and looks better.  He wanted to know the investment and equipment needed.  I went right into biscuit joints, lap and dado joints and dove tails.  Each of these methods has a machine associated with them in my mind and all were out of what he wanted to spend.  Then he asked if there was a hand tool or something like that.  I told him there was but I know nothing about hand tools.  It is more practice and time that I am willing to put in.  I have a deep respect to those individuals who make wood projects from hand tools. They truly are artists in their own right.

Tuesday, December 24, 2013

Year in review

So did I get everything done this year that I wanted, no.  Did I reach the goals I wanted to do this year, no.  Is this disappointing or unexpected, no.  There are always things that I want to do but I do not get to because something more interesting comes up.  So here are some of the highlights:
  • I had a goal of making enough money to buy a lathe.  I did not even come close.  I did have some sales but as most hobbies, I lost more money than I spent, but I almost broke even.  My wife says I will never get a lathe because there are more important tools that I need or want.  To be honest, she is probably right.  I am going to need another belt sander.  My current one is starting to jump the belt and I feel it is going to die soon.  I also need to build a router table and get a plate for it also.  I am also going to need a miter saw.  I will someday have to return my father's saw, but right now it works where it is at.  In fact I have his planer also.
  • I still want to make the Marvelous Transforming Toys from a few years back.  I even have some of the patterns attached to blanks.  There are just other things that came up.  I did catch up on all the construction equipment in the Wood Magazine publication and then another one came out a couple of months ago and there will be another piece in a month.  It never ends.
  • I never did any of the craft shows or online sales.  It is not that I cannot do it, it is the fact that I am scared.  I have a firm belief that if I commit to something then I fulfill the commitment.  These toys and projects take a lot of time and I want to make sure they are safe.  I want to have the toy complete before it is sold rather than take orders in fear that I will miss a child's birthday or Christmas.
Enough with the things I did not accomplish this year and on to the stuff I did do.
  • The biggest thing is that I now have a garage. I can go out there when I want (and if it is ok with the wife) and spend a few hours and then come in to spend time with the family.  I have a decent set up and I like how it all came together.
  • I have switched to shellac.  Not a huge thing but it is a pretty drastic change for me.  I am glad I have all the equipment to use it.  
  • I finally finished a bed that fits a mattress.  I love it.  Beech was very nice to work with and it came out great.  I have one more to make.  I do not know if is going to be a bunk bed or not.  We had a recent addition to the family so I have a couple of years to plan it all out.
  • I have become a lot better at the scroll saw, evidenced with the last Christmas project.  I am starting to lean more that way.  The projects tend to take less time and setup is a breeze as long as I do not change the angle of the blade.  I do not believe I will ever get into intarsia.  It seems a little too precise and a lot of "sand until it looks good" projects and all the pieces have to fit perfectly together.  
  •  I am listening to the Wood Talk podcast and realize there is a lot of stuff that I do not know about woodworking.  One of them is strictly hand tools and so I am not even in the same league.  It is interesting the things that I am picking up and they have the same problems that I encounter.  So I am moving into using some of the technology that I have had at my fingertips. 
  • I also learned there is a difference in sandpaper.  I am in love with the Ekoforce by Uneeda.  I am getting smoother finishes, the paper is lasting longer and it does not clog up.
Goals for this year:
  • Finish the monster trucks! I am almost done but the handwork is killing me.  I also have some planes I need to finish.
  • Of course catch up on the Wood Magazine construction equipment.  It is a fantastic set.  Maybe I will design one that is more toddler friendly.  The acorn nuts keep coming off despite super glue and they are a choking hazard.
  • We just got a CNC milling machine in the sample shop I manage.  I am planning on learning it.  I will not abuse my responsibility but I do have some access for personal projects.  This is not the CNC machine that will carve ornate figures or designs.  It is meant for sheet goods.  The smallest tool I have on it is a 1/4" ball end mill.
  • Of course there is a Christmas project I have one planned.  I don't think it will out due this year's.  I am open for more.
  • Last but not the least, not to accomplish anything but have fun doing it.
I am amazed at the traffic my blog gets.  It isn't that great but it is interesting.  I will occasionally see the traffic that comes through, where it originated and what they were looking at.  To my surprise the most popular post is the "rocker template".  I do not know why.  There are a lot of hits also on the construction equipment and scroll saw projects.

Sunday, December 22, 2013

Christmas presents and decorations

I guess I can post this now that these have been opened and given away.
In the grocery store I was looking at the hobby section and there was a scroll saw holiday issue.  I found some things that looked interesting and so I purchased the magazine.  This is the first of a couple of projects that will come from this publication.
The picture does not do it justice: "O Night Divine" with the star and a dove
 
Each side has a depiction of the the nativity.  The top does come off so things can be put in it.  I cut the notches in the side panels on the table saw.  It would be impossible for me to cut a straight line that far into the wood on a scroll saw.  This way the sides fit together snugly.  I made four boxes so I stacked them all together to give me a good stable base to cut the grooves.
Mary, Joseph and Christ
Shepard and sheep
Camel and Angel
Three wise men
The blue tape was a life saver.  I would have never been able to sand off the pattern without damaging the project.  There were a couple of areas that did not come out as I had hoped but they still came out.  I made four of them.  I thought my wife would like the maple one but she opted for the figured oak one because maple did not have the color for a Christmas decoration.  The cuts were really not that difficult when I had a sharp blade.  I knew when the blade was getting dull it would walk all over the place, especially in the figured oak.  There were a lot of holes that needed to be drilled.
 The interesting  part of this project was all the sharp cutouts.  I though I would have a lot cutouts all over the floor.  I did but not as much as I had thought, most were really thin or the cutout completely turned to sawdust. It also was neat to discover the blades can go through very small holes.

The second project came from a project that I did 25 years ago.  It was made in leather.  This was not a good medium for me.  I am trying to redeem myself and make them out of wood.  The leather ones have slowly fallen apart and are being thrown away this year.  My grandmother had ornaments with all of her kids, their spouses and grandchildren.  I am doing the same for my mother this year.  I have plenty to add to the family still.

Here are the original sleds that were made 25 years ago, what  is left of them anyway.


Here are the new sleds.





These were my design.  I had fun building and figuring out how to make the fixture to put them together.  They are still a little more fragile than I would like them, but I think they came out nice.