Wednesday, February 17, 2010

Week six

The abbreviated story of lumber is that a tree is cut down and then cut into flat square boards and sold. This week I reversed the process. I took those square pieces and made them round again with a lot of waste. Yep, this week I made dowels. These are not for the four projects I am working on now, but I wanted to make square boards round. The octagons are in the process of being made round. This is a new process for me called face tuning. On the back of each octagon is a piece of scrap wood. Its soul purpose is to be able to mount the hardware that attaches to the lathe without damaging the work piece. The pieces are glued together with a piece of paper in between. My instructor said that once the piece is complete this glue joint is easily separated by a chisel and mallet. I am a little worried. The lathe spins the part at 1200-1500 RPM. I am using chisels to cut the details. I don't know what is going to happen.
The octagons are maple and poplar with a ply wood scrap block. They will be made into disks. Starting on the right: the first dowel is poplar, the second is clear pine and the third is cypress. The last two are maple turnings that I started a year and a half ago. I think I need to finish them.

The other four projects are coming a long. One is almost ready to be finished. The other three have so more work to be done. It is all detail work though so the changes from week to week are going to be small now that I have to make square wood round again. My projects are starting to take notice in my class and I have received some nice compliments.

Tuesday, February 9, 2010

Week Five

I cannot say that I accomplished a lot this week. I have sort of been side tracked on a couple of other projects. In class I have access to a lathe and I really need to get some parts done in order to make some future projects. However I did have a chance to do some of the detail work on my projects.
This week I have learned that I cannot count. I am short one axle holder and two steps. Oh well, I should be able to make those pretty quick. The projects are starting to come together nicely. I am happy the way they are turning out. I have learned that my father's tape measure is off 1/8" in the positive (better in the positive than in the negative). His response is that I should have been using that tape measure though out the entire project. An eighth of a inch is enough to throw off the entire yield of a board and because I am making toys I also use a ruler. This is the reason some of my parts are a little big.
If you have not been able to figure out what I am making the pictures should give it away. I do not have the trailer in the picture for two reasons: I have not changed it since last week and it is 21" long.
Last week I had some one in class come up to me and tell me that a true woodworker does not use nails. This week another classmate asked if I sold my toys because she would like to buy one. We shall see.
I also learned something this week talking to a coworker about lathes and turning projects. His specialty is the lathe and asking about turning and he offered to give me some wood. I politely declined but he insisted. He purchases turning blanks online and the company uses wood as packing material and it was too small for him to use. (This is where I received the wood for the helicopter.) He said Wood workers give each other wood that they cannot use. So he gave me a chunk of spalted huckberry and cypress. He also offered to lend me his turning chisels because the school ones are not that great. Next week I hope to have some turnings done.

Friday, February 5, 2010

This fish does not get water


I spent four weeks on a few complex projects and post a picture of a fish that took me a couple of hours to make two of them and everyone comments on the fish. I am finishing this fish tale on this post. The plans wanted me to use a aniline die. at $7 an ounce, I don't think so (There are nine colors). I read in one of the books that food coloring is a good way to stain wood. So that is what I used. Well water makes wood swell and these were tight fitting pieces anyways. The good thing is that the fish is now colored and I only colored one of the fishes. The bad new is if the fish gets wet the colors will run. This is not a good puzzle for kids that put everything in their mouths. It would be like sucking on a permanent marker. I need to clear coat it still and with the weather I don't know when I can do that. Not bad for a weekend project that was purely experimental.

Tuesday, February 2, 2010

Week Four

There is a point were I get really excited about completing projects; this was that week. I had a great week and got a lot done. not as much as I wanted but there is never enough time in a weekend. My projects are getting closer, but the problem is I am getting distracted by other projects. I am working on some boxes also. They are very basic but I was asked to build them. I also did my first puzzle. I will talk more about that later. I am excited to put on the axles. All I have to do is drill the holes and glue. The fenders are ready to glue on and they are looking more like toys. I spent most of my class sanding though. It is a necessary pain.
Now for some stories:

On Saturday I was able to pick up some lumber at Peterman Lumber. Great lumberyard with a lot of different species. I was delayed several weeks due to truck problems and weather. They had a bunch of discounted hard maple so I stocked up a little. I also picked out some exotic hardwoods. not too bad priced when I only picked up one board foot. However I do wonder what damage I did to the rain forests. I will have to post some pictures later. Later that day I made a huge pile of sawdust (I haven't cut into the exotic hardwoods yet).

Monday was class. I got a lot of sanding done and I put together the boxes. As I was nailing the boxes together, one of my classmates came up to me and said, "A real woodworker doesn't use nails." In some cases I agree because I do not use a lot of nails on my projects. However, nails do a great job of keeping things together while glue dries. He came back a little later and said that I could borrow his bottle of glue. I showed him my bottle and told him the nails were to keep it together. He left me alone after that, not sure why. I also was able to talk to the professor about some lathe work that I need to do. It actually may finish the candle sticks I started a year and a half ago!

I also did my first scroll saw puzzle. I want to get better at the scroll saw and this is a good way to do it. I also learned a lot about wood and scroll saws with this day project. I had some one inch glued panel scrap that I used to make this puzzle. I don't plan on making that mistake again. The first one had a hidden knot in the middle of one of the glued up pieces. Of course the knot was in the middle of the fish. On the second one I realized the white rings in pine are a lot softer than the dark ones. So I would be pushing to cut and then I would cut into a white ring and cut way too far. They look good and they work. I can take the pieces out from both sides which means the scroll saw was set up correctly. They will be painted with food die and polyurethane.
It was a weekend that I needed.

Tuesday, January 26, 2010

Week Three



It was another fun day at class and I progressed more on my projects. They are now starting to take shape and look more like toys than just a pile of wood. I did make another mistake, but it was kind of on purpose. I wanted a little bit stronger of a joint on the boxes so I put a dado in the front and bottom of the box. This created a groove/space where the back is going. not to worry a couple of pieces of scrap and you will barely be able to tell were I made the mistake. Now that the basics are pretty much done, the fun begins. I have a bunch of detail work to do.

Sunday, January 24, 2010

Toy Testers Wanted

I have been thinking (which is never good) about all the toys I have made and would like children to use them. My wife and I have talked about opening our house to let kids play with them. Now I do not want this to turn into a free for all so there are some guidelines.
  • Kids ages from 3 to 8 years and potty trained. (I change enough diapers)
  • I can only allow 6 kids at a time and 2 kids maximum per family.
  • I am going to exclude kids related to me because they see all the toys I make and benefit from me making toys (This my change)
  • Parents are responsible for dropping off and picking up their children on time.
  • I will be taking pictures and posting them on my blog. I will not mention names on my blog.
After talking with my wife, we would like to do this every fifth Saturday from 10:00-12:00. We would provide a pizza lunch. My e-mail is on my face book account so please e-mail me if you are interested (I may need your phone number) and I will contact you by Wednesday if your child is selected. We are looking at doing this Saturday, January 30th.
I don't know if I am going to have first come first in or randomly chosen but if this works out I plan on doing more. Kids who have not been over will have first priority over kids that have been here before so everyone who wants will have an opportunity.

For those kids ages 9-13 who feel deprived not coming over I am looking at starting a wood working class. I have not put all the details together because it is a little more work to teach woodworking.

Thursday, January 21, 2010

Week Two


Here is the latest on the projects I have been working on. There are more pieces and I have some patterns adhered to some pieces of wood to scroll saw. I am not as far as I want to be because of some factors beyond my control. So far they are coming out good. I only have one mistake so far. I glued incorrect parts together. Thank goodness for an article in Wood Magazine I was able to save the project. There was an article about fixing a glue up mistake on panels. In short, take a microwave heating pad (I used a sock full of rice) and heat it up. Put it around the glued panel seam that needs to be separated. In a few minutes (10-15) the glued panels would come apart. Granted the glue can not have dried for weeks. Well I tried it but my parts was two face joined pieces and not a panel so my part was too big to put the rice sock around and I thought I was going to lose two of the hardest pieces to make. Then I realized my part was small enough to put in the microwave. One minute later and a little nudge from a chisel and hammer, the parts separated. With a little bit of sanding they will be good to work with. Hopefully the toy is not radioactive now!