Tuesday, September 1, 2015

The Front End Loader

This is one of the most requested items by my kids.  Ever since I brought home the design they have been asking for it.  If I remember correctly my middle child actually slept with the plans the night I brought the plans home.  My oldest slept with the toy last night.  There are things that I like about it and things that I am going to modify. 
 First problem was all about the design process.  When I was putting it into the CAD system everything fit even though some of the joints were close or parts were thin.  The shovel caused the most grief.  Because the joints were tight, my first bucket did not move.  There were some modifications and I figure that I need to give the joints about an 1/8" tolerance.

The second mistake was trying to make the bucket thin.  I do have to give a little bit of back story on this process.  The bucket is made up of laminated pieces and to line all these parts up I marked 1/8" holes in precise locations in the pattern.  This allows an 8d brad nail to be put through the holes and line up the various parts.  I started with 1 1/2" thick material. The first mistake was that I cut out the part and then drilled the holes.  The 1/8" drill bit walked on a couple of the parts making alignment off. 
First assembly of the shovel.

My second mistake was using 1 1/2" thick material on a scroll saw with the wrong blade ( I used a #7 skip tooth).  The blade did not cut square.  I figured I could sand it all out.  This is probably why my sander belt sander died.  So I sanded all out and sanded to the assembly holes, which were less than a 1/16" from the edge.  I still did a dry fit which is when I found out all my joints were locked.  So I went back to the design and moved all my joints out and all the pieces of the bucket were made with 3/4" pieces.  I also thickened the wall of the shovel.  The second shovel went together much easier and less sanding.
 This was a fun little project and with a lot of discoveries.  Glad I finally completed it for my kids so now they can pressure me into a garbage truck.

The Belly Trailer

So I was sick over the weekend which gave me time to assemble the toys I put finish on.  This is the belly trailer that goes with the semi truck cab plan. 

It is amazing what I learned as I built the trailer.  Things look like they will work great in the 3D design but when the actual parts come together there were problems that I did not think about.
First was the holder for the doors.  In the design the piece with the groove had plenty of glue bond to support the constant opening and closing of the doors.  When I made the part, I realized there was no way this part was going to hold up.  The easy fix was to add small support pieces to the edges to allow more glue bond and add the needed support.


 The doors have two dowels to hold the doors in the groove so a parent doesn't have to continually put the doors back in when a child pulls them out.  These have to be put in after it is finished.  I didn't think that it was going to be a huge deal until I tried.  There is not enough room in the trailer to accommodate a hand to hold the peg and a hammer.  The solution is simple enough.  If the edge of the dowel is rounded it can be pushed in enough to hold it in place while it can be set with in with a hammer using a small piece of 3/8" dowel as an extension.

Fun little project and made me do a couple of angle cuts that I do not like to do.  My favorite part of this project was figuring out the design.

Monday, August 17, 2015

A Hot Day

Summer finally arrived in Southern California.  I think we were having a little bit of everyone's summer.  We had cool weather and then monsoon weather and now we have the heat and the fires.  Not the best weather to prep, cut and then glue wood in the changing weather.  I am working on several projects.  I have a grader and dump truck which I will put up for sale.  These are to confirm the drawing changes I made from the prototype.  I also have a belly trailer for the semi truck I just made and a front end loader.  These are the new designs that I am working on.  I think I got a little too confident in my abilities and made some decent design errors in the front end loader. 
The first main mistake was making the shovel walls too thin.  The concept was good but the execution was very flawed.  When sanding it smooth I sanded through some of my alignment holes.  The alignment holes were also close enough to the edge that it weakened the part when I drilled them.
This leads me to the second error.  All the parts were made out of 1 1/2" thick lumber. I thought the 1/8" drill bit would not walk on me when going through.  This was an incorrect assumption.  This caused a lot of grief.  It was also a pain to cut out on the scroll saw.  I admit, I was probably using the wrong blade. but a #7 should not have had a problem cutting the part out.  Well the blade did not cut straight.  No problem, that is why I have a sander.
Third problem was not checking the parts before gluing them together.  Yes I did a dry fit.  I have two parts that are close in size and important difference is the hole is a different size by a 1/32" for an fixed and movable joint.  I mixed them up.  It will not affect the end result, just a little inconvenience.  So I have made changes to the drawings and will see how the changes work.

Saturday was also the day that I really felt the heat in the garage.  It was tough doing glue ups.  It felt I like my open time for the glue was less than a minute until it skinned over.  That is not a lot if time to spread it and put the pieces together. 
All in all it was a productive day.  I hope to finish a lot of these projects labor day weekend.

On a sad note, my 4" belt sander died.  I think it will cost more in parts and shipping than to buy a new one.  It served me well.  I was hoping for a little bit longer until I upgraded to a 6" belt sander.  The motor was out of balance, some of the welds have broken, and in a final act of defiance it shredded it's drive belt.  So I ma in the market for a new belt sander.

Tuesday, July 21, 2015

My Table Saw and a Rant on Sawstop

In my last post I alluded to my saw no longer being parallel to the rip fence.  So this past weekend I did some scroll saw work that I needed to complete and worked on my table saw.  I have to admit the fix was not easy to figure out.  I first looked at the blade being parallel to the miter slot.  It was off by about .05".  Not a lot but since I had the equipment set up I fixed it to .01".  This actually made the blade to the rip fence worse. I was out of adjustment on the fence by over an 1/8".  One of the best things I have learned, is the best reference on tools are the instruction manuals.  So I pulled it out and looked.  It said if I had run out of adjustment on fence to take it to a certified repair shop.  So my thought was if I was going to have to replace it then I might as well try and fix it.  I have DeWalt contractors table saw with a rack and pinion fence system.  I figured I had jumped a tooth so I loosened a couple of bolts moved over one tooth.  This gave me enough adjustment to fix the fence.  It was surprising how easy it was to jump the tooth.  So I really tightened everything down.  The table saw was one of the first tool purchases I made so it is over 15 years old and I have adjusted it once.  It is still making saw dust.
The goal, one of these days, is to upgrade to a cabinet saw.  I would like to have the flesh detection technology.  I still have all my fingers and have had no major injuries with a table saw, but this is just an added layer of protection.  That being said, I have looked at SawStop table saws and their technology.  When they came out, I was skeptical. When a person won a lot of money for being injured because he was misusing a table saw, I was pissed.  It all came down to the fact that his saw did not have the flesh detecting technology on it.  This was before the contractor's saw was even out on the market.  Bosch, just recently, advertized that they would be releasing a contractor's saw with flesh detection technology that will not destroy the blade.  I was excited, finally, SawStop had some competition and hopefully bring down the cost and stimulate the development in other tools.  Making this technology more accessible to the general public.  It now just came out SawStop is suing Bosch for patent infringement.
I have to admit, the flesh detection technology has saved many from serious injury.  I work in a large scale cabinet shop in the sample shop.  Although my team has not dropped a blade, I know of several injuries that were avoided within the company.  I have no problems with the technology, I have a problem with the method to which SawStop is forcing themselves into law.  They have tried to get legislation and laws passed.  To my knowledge they are stalled in bureaucratic discussions indefinably.  I also have a problem that thousands of people get injured on table saws for doing stupid things are suing for millions.  I am a firm believer that one needs to know how to properly use the equipment they use.  I have a problem that SawStop is going unchallenged in development and marketing.  These saws are still outside the budget of a DYI'er.  I also believe they missed their biggest market, large manufacturer.
In my sample shop I have two table saws, one a SawStop, mandated by OSHA, and the other is a panel saw.  I feel the panel saw is much more dangerous than the cabinet saw.  It is much easier to get you hand near the blade and the pieces being cut are much larger.  There is no flesh detection technology available on these saws yet.  I have to get rid of the panel saw and get something that has this technology for the sample shop.  Thankfully, a company just licensed the technology and will selling a panel saw in the fall.
So what is my opinion on SawStop suing Bosch, I hope Bosch wins.  I want to see competition in the market.  SawStop has had a good run and now they need a little pressure to improve and drive costs down.  I have nothing against the products of SawStop.  I am actually considering them when I upgrade my saw, however I would like to see some other options.  This is one of the places were I think the patent has suppressed technology and slowed the development of this technology in the woodworking arena.

Tuesday, July 7, 2015

Sanding Table

I have been wanting to build a cabinet for my belt sanders that would hold all the toy making parts, wheels, axles, and other things as well as my sanding supplies.  These parts were stored in several cabinets and on shelves.  I had separated the toy parts with containers and it worked but was not really happy with it.  So over the holiday weekend I put this cabinet all together.  I had cut out all the carcass components and made the frames the weekend before.

I had two storage goals that I wanted to accomplish with this cart.  The first was to store all the sand paper.  My belts and paper were just sitting on shelves. I wanted to hang my belts, keep the paper flat and my drum sanders out of reach of my kids.  They liked to take them and use them as wheels.  I made a pull out drawer where I can hang my large belts.  In the future, I would like to upgrade to a 6" x 48" wide belt, so this drawer can accommodate the increase in width and length.  On the other side of the drawer holds some of my small templates and all my drum sander parts.  This way I hope to keep better control of the parts.  I then have pads and smaller belts in a drawer

The second goal was to organize and store all the parts for making toys.  I have accumulated a lot over the years.You can sort of tell that I like the treaded wheels and have a lot of them.  It is also apparent that I need to order more of the 1 1/2" wheels.  This is one of the benefits of having everything separated out.


The other benefit was getting rid of all these extra containers.
There are some drawers that I did not show.  They contain my finishing chemicals and supplies.  They were not in an area easily accessable to my kids but I did want them out of sight.
 
Over all I removed three pieces of furniture with this cart.  Shop looks a little better, still a ways to go.

The design was a work in process over the course of the build and I made some assumptions that bit me later in the build.  The dimensions and over all look was pretty set.  The first big assumption I made was that I had enough tolerance to grow my partition back 3/4" for my small drawers.  I had to cut my large drawers to accommodate the partition.  More of a pain than a problem.  Second problem was that I did not allow enough room for the glides on the sanding belt drawer.  I was able to barely squeeze the drawer in.  I think I have less than a 1/32" between the bottom and the glides. 

I do plan on adding doors to finish it off.  I did not have wide enough stock to do them at the time.  I do not plan on finishing it.  I really do not see the point of finishing shop furniture.   The top is a kitchen island top from work.  This is one of the perks of working at a cabinet shop.  It is not food grade so could not be sold.  Everything else is maple and plywood.

It was a good weekend build.  The only bad part was that I started to notice that the board would drift when ripping on my table saw.  The problem was easy to diagnose, my fence and blade are not parallel.  It is a relatively easy adjustment except there is no more adjustment in the fence which means the motor is moving on the table.  I was hoping for a few more years before my saw needed to be replaced and replace it with a cabinet saw.  I am hoping to dig in this weekend to straighten it out.