Tuesday, February 15, 2011

The Workman Train

Finished another train.  This one was also featured in the Sacramento train museum.  Sorry the picture is so bad.  If you want to see the picture better copy and paste it into MS Word and play with the bright and contrast buttons.
Here is the complete train it was fun and a challenge to build.  It was worked on along with the train in the previous post.
There are a five cars to the train and some are suppose to have moving parts.
The locomotive and tinder are made out of pine.  The boiler is actually made out of cypress.  I was given a turning blank from a co-worker and this seemed to be the project to use it on.  Just a note, I did an initial turning to cut it down to size and get to rough dimensions.  I missed a week of class and in two weeks the wood had warped where I did the plunge cuts.  Lots of sanding on the lathe and the parts remained a little over sized.  It still turned out though.

This is the crane and taker.  The tanker was pretty easy the crane however was the last car finished.  the crane does move but not very well.  I don't know if I could design it better or I just like that it sort of works.

This is the side dump car and the hopper.  The side dump car really works.  The hopper was made on the band saw.
There are a couple of cool features with these trains. The General,  Diesel, and this train are all interchangeable cars.  This means that one of those long trains that blocks traffic for a while can be made out all three of these trains.
On a side note.  if any of the people that I have given blocks to have a block that has this profile to it:

Can I please get it back.  I miss counted how many wheel covers I needed and I am about 16 short.  I may have used the block all up so I don't know if it made it to the scrap block give away.

Sunday, February 13, 2011

The General Train

Well I completed another train.  I thought I was done with trains and this was in the Great Book of Wooden Toys.  I had to use a lathe so I completed the engine in the class I took a while ago.  The cool thing is that I was able to see this train in the Sacramento Train museum last year while I was making it.  
This is the complete train.  It only has four cars and not that hard to make except the engine.  The hardest part was the engine.  The engine looks like a deadly weapon with the cow catcher on it.  

 All the round parts for the engine was made out of a single turning.  Fun to do but it was a trouble to make sure the smoke stack, sand pipe, light and bell all in the same line.  The cow catcher was one of the last parts I made because I needed a bandsaw.  I really enjoy using the bandsaw and it makes the smaller cuts a lot easier.
 There are three passenger cars to this train. These are the baggage and passenger car.  


The final car is the observation deck.  It was a lot of small parts and drilling.

The train is made out of pine and walnut.  There is some birch, maple and beech because they were conveniently the correct size scrap.

Tuesday, February 1, 2011

Christmas Letter - Late

Happy Holidays,
It is that time of year were I get to brag about all the things that the Anderson’s have done this
year. This is a very good year for you because you get to hear more about our son than about the boring
adults. In a nutshell here is the life of the parents.
Katie has retired from the public education system and is now a full time mom. She would have
it no other way. She still plays the piano for the primary at church and occasionally the organ. She is
having fun taking Kyle to various tot programs put on by the city. Oh, I almost forgot, she is expecting
our second child in the beginning of May. It is a boy.
I am still at RSI Home Products designing and building cabinets. If that is not enough wood
working for me I build wooden toys in my spare time. I took on a couple of paying projects to help pay
for my band saw. I can honestly say that I like giving away toys more but it is not very economical. You
can see my projects on my blog sawdustsplinters.blogspot.com.
This year Kyle became quite the little camper. In May he took his first camp out and did very
well. He even was able to pet a snake. So in July we took a trip up to Sequoia Nation Park and spent a
week in a tent. We went with Katie’s brother’s family and her parents also came down to visit while we
were there. We had good food and were amazed how beautiful the forest was. It would have been nice
to have Kyle walking at the time but we let him crawl at every visitor center we stepped in. By the end
of the week he was happy to be home and needed a good bath. We learned that Kyle has a fascination
with streams and waterfalls. He would get so excited when he would hear running water and start
laughing. This also explains why he comes running whenever he hears the bath water even if it is not
his.
Kyle has also become quite the little climber. We are afraid that some day we are going to
find him on top of the refrigerator. We cannot keep him from climbing. A lot of times he climbs on
something to just prove a point, once he has reached his destination he starts laughing and wants to get
down to do it again. We have also learned that he prefers the simple things. We can give him all the
toys in the world and he will play with a box for hours.
Although he was born with TEF, he has not had very many complications with it. When he
turned one we took him to have an esophagram done and they found very little structuring where the
surgery was. Yes he still sounds like a seal sometimes and gets food caught in his throat but he has had
no major problems.
I have to say Kyle is the cutest kid ever. The funny thing is that he is only 18 months and
completely independent. He does not need our help at all he doesn’t want to hold hands but gives the
best hugs ever. He takes after his mother, he likes to be bundled up and warm. He takes after his father
and will not perform on demand and will not smile for the camera. It is fun to see his mind work. He
will sit for a while trying to figure how a toy works and he is so proud when he does. Come and watch
Kyle grow (and the new addition in May) at pigsflyhere.blogspot.com.
Hope this past year has been good to you and the ones you love. We are especially grateful for
this season and the message it brings of peace through our Savior, Jesus Christ.

Love,

The Andersons

This was suppose to go out before Christmas but we are a little late.

On a side note I have a safari puzzle that I would like to give away.  All you will get is a Ziploc bag of pieces so you might want to print off the picture as reference.  All I ask is that you pay for shipping.  It will be for the first person who asks.

Sunday, January 23, 2011

The Barn

Here was last scroll saw project for last year.  I finally finished it.  It is barn with a few animals.


Cow, pig and goat

Horse and sheep


Tractor and cart
I thought I was done with these and Wood Magazine had a dinosaur puzzle in their latest issue.  My discovery on this one was that sanding off the paper pattern will gum up the sand paper.  The patterns are adhered to the wood with spray adhesive.  The spray adhesive attaches to the sand paper and ruins it.

Sunday, January 16, 2011

One scroll saw project

I had two major scroll saw projects I wanted to do last year .  Both of them are puzzles because I thought this was the best way to learn how to use a scroll saw.  One is finally complete, minus the base.  This one is the safari.  The pattern came out of the Wood Magazine.  A while back I purchased some board feet of exotic wood.  It was for these two scroll saw projects.  Here are the pictures.

Zebra and giraffe
Tree and rhino
Lion and elephant
There were some things I learned from this experience.  All I could do is learn because I am new with this tool.  There are several different saw blades for the scroll saw and I used what was the standard blade #5.  after cutting most of the parts out I finally read the instructions and it said to use a #2 blade which is much thinner. I broke several of these blades and went back to a #5. 
Making the two different woods fit together (the trees and mountains), they are  first double sided taped together and cut out together.  Two things can happen with this method:  First the tape does not hold and parts shift during cutting. The second is that the wood can be forced so hard into the blade that bends inside the wood and the parts do fit together.  I had both happen.
The nice thing about a puzzle is that it was had to screw up but I managed to do this several times.
They came together well, just took longer than I expected.  I think I could complete one in a day but it does take a lot of focus. The scroll saw was also time filler projects. I would work on them an hour here and there to work on these projects. 

On a side note, I mentioned I would like to share the wooden toy I have made with out giving them away.  My wife and I have talked about opening our house up every fifth Saturday for kids to come and play with the toys at our house.  We are going to try for January 29th from 11:00-1:00.  We have a 6 kid limit and we will provide lunch - pizza.  We will not provide transportation.  Please e-mail me your child's name and they will be put in a hat for a drawing.  Drawing will be held on Saturday January 22.  Think of it as free baby sitting.

Friday, January 7, 2011

Beads

I haven't posted this on the my blog even though they have been done more than a year.  This was part of the Christmas presents for the nieces and nephews last year.  I was not happy how the paint on the white and yellow beads kept cracking.  It still does and I am saying "oh well."  I made five sets and I have two extra. 
They were interesting to make.  They are are all out of 8/4 lumber (planed down to 1 1/2")  All the parts were made on the table saw except the cylinders, they are cut dowel.  They were simple to make not so easy to paint.  Maybe I will try Rit fabric dye if I make these again.

Friday, December 31, 2010

Year End

It has been a good year and I have learned a lot.  There were several projects that I completed and others that I am still working on.  Some things that I have learned:
  • Make sure you read the directions.  I am very much a novice at this and cannot assume that I know the best way to do it.
  • There are several ways to do the same thing in wood working.  Do not limit one self to just one way.
  • I could make money doing this but not enough to support a family.  My family is more important than my hobby.  On the other side I can fund my hobby.  I did earn enough to buy my band saw.
  • I don't make a very good business owner.  I tend to give away more than I charge.  
  • Fixtures make a task much easier and there are several fixtures that I should make.  Now where to store the fixtures.
Here were some of my favorite projects:
  • The desk.  Even though it was green and I did not like the way the finish turned out, it is still one of my favorites.  It is these projects that keep my mind sharp and thinking.  This is a project that I designed and had to work though design problems.  If you want me to make something, I love a challenge, but I don't buy the wood.
  • The dominoes were my favorite toy this year.  Fun to build and paint and finish.  Maybe some day I will make the box that goes with them
  • The model T series was also fun.  It was this project that convinced me I needed a band saw.  I am just pleased how they turned out.
Tools aquired this year was just a band saw. I think I am done for a little while (don't tell my wife).  I will still need odds and ends and bits but as for major tools, I think I am good.  The last thing that I think I would use is a lathe.  If any of you have any suggestions let me know.  I always like adding to my wish list.

Goals for next year:
  • I was given a book called Marvelous Transforming Toys.  I want to make everything in this book this year.  I think my skills and accuracy will improve with these projects.  It is going to take a lot of time and some money.  I am open to monetary donations to fund my wood working addiction.  
  • There are three other toys that I would also like to make this year.  Those will be shown when they are finished. 
  • Over the past year I have learned that kids really like to play with the toys I make.  I am humbled by this and also feel sad.  I would like more kids to be able to enjoy these unique toys.  I hope to be able to open my house to let more kids play with these toys.  I don't plan on giving them away, I all ready do a lot of that.
  • I would like to do another major scroll saw project even though I am not finished with this years.  I am still learning and have become more proficient.  I can almost stay on the pattern line some of the time.  
  • There should be at least one design project again this year.  I do not know what it is, but it is something I enjoy doing.  Any suggestions?
  • I plan on spending more time with my family.  There are several things that I can do at my house and don't need to go to may parents garage every weekend.  I might even take a few more tools home with me.
This year was fun and I hope that next year will be better.  I hope that all who read this blog has a happy and prosperous year.

By the way,should I keep the scrap block give away?  Sometimes I think it is the only way to get people to read this blog.